|
|
Performance Numbers for Request Handling in 250 Node Network
Performance Numbers for Request Handling in 10000 Node Network
This section gives the performance statistics of the Network Simulator in 6.0. The performance test were conducted separately for a 250 node network and 100000 node network. The environment in which the tests were performed, the hardware configurations and the performance numbers for request handling and trap handling are provided in this topic.
Performance for Request Handling in 250 Node Network
Test Environment:
The performance test was conducted on Windows and Linux machines.
System Requirement:
Processor: 2.4 GHz
RAM: 512 MB
Hard Disk: 20 GB
Performance Numbers:
|
Number of nodes Asynchronously |
Number of OIDs Asynchronously |
Number of response processed in Windows OS |
Number of response processed in Linux OS |
|---|---|---|---|
|
100 nodes |
Single OID |
400 PDU /sec |
833 PDU / Sec |
|
100 nodes |
Multi-varbind request with 6 OIDs |
217 PDU /sec |
444 PDU / Sec |
Performance for Request Handling in 10000 Node Network
Test Environment:
The performance test was conducted on Windows and Linux machines.
System Requirement:
Processor: 2.4 GHz
RAM: 512 MB
Hard Disk: 20 GB
Performance Numbers:
|
Number of nodes Asynchronously |
Number of OIDs Asynchronously |
Number of response processed in Windows OS |
Number of response processed in Linux OS |
|---|---|---|---|
|
100 nodes |
Single OID |
110 PDU /sec |
400 PDU / Sec |
|
100 nodes |
Multi-varbind request with 6 OIDs |
90 PDU /sec |
294 PDU / Sec |
Performance Numbers for Trap Handling in SNMP Trap Stormer
From Trap Stormer:
The Trap Stormer is used to test the performance of trap handling in Simulation Toolkit. The performance of the trap is calculated using the Trap Stormer in normal mode.
|
Trap Version |
Varbinds Configured |
Rate of Traps in Windows OS in Normal mode |
Rate of Traps
in Linux OS in Normal mode |
|---|---|---|---|
|
V1 Traps |
with 2 Varbinds |
900 / sec |
935 / sec |
|
V2C Traps |
with 3 Varbinds + default Varbinds |
750 / sec |
870 / sec |
Performance Numbers for Trap Handling in Network Simulator
The performance of traps sent from Network Simulator is given below:
|
Trap Version |
Varbinds Configured |
Rate of Traps in Windows OS |
Rate of Traps in Linux OS |
|---|---|---|---|
|
V1 Traps |
No Varbinds configured |
550 / sec |
670 / sec |
|
V1 Traps |
with 2 Varbinds |
455 / sec |
580 / sec |
|
V2C Traps |
with default Varbinds (2 Varbinds) |
410 / sec |
610 / sec |
|
V2C Traps |
with 3 Varbinds + default Varbinds |
330 / sec |
450 / sec |
|
|