|
|
This document gives a brief overview of the IOS commands supported in Cisco PIX Firewall device.
Cisco PIX Firewall Commands Supported in CLI
| Command Mode |
Command |
Command Description |
|---|---|---|
|
User Mode |
enable |
To change the mode from User to Enable mode. |
|
help |
Displays the help description in the Modes. | |
|
exit |
To log out from the CLI client. | |
|
logout |
To log out from the CLI client. | |
|
show clock |
To show the clock time of the CLI agent in the network. | |
|
show history |
To display the History of the connected terminal. | |
|
show snmp |
To show the SNMP status of the device in the network. | |
|
show version |
To show the version of the device. | |
|
Enable Mode |
clock set <time> <day> <month> |
Sets the Clock with Date and Time in the firewall device |
|
configure terminal |
Change the mode to Configuration Mode | |
|
disable |
Change the mode to user mode from Enable mode. | |
|
ping |
Send echo messages | |
|
show access-list <number> |
Displays the access-list configurations | |
|
show blocks |
To show the system buffer usage | |
|
show conn |
To show the number of connections in use | |
|
show failover |
To show the failover status | |
|
show memory |
To show the free memory available | |
|
show nameif |
To show the current names and security levels of each interface | |
|
show clock |
Display clock time of the CLI agent in the network. | |
|
show history |
Displays the History of the connected terminal. | |
|
show version |
Displays the IOS Version and its details of the CLI agent. | |
|
Config Mode |
access-group <acl_ID> in interface <interface_name> |
Binds the access list to the inside interface. |
|
|
access-list <number> <deny/permit> host <hostname> |
Creates the standard access list entry |
|
|
access-list <number> <deny/permit> <host name>/<ip address> |
Creates the standard access list entry |
|
|
exit |
Change the mode from Configuration to Enable mode. |
|
|
hostname <word> |
Updates the given value as the host name. |
|
|
snmp-server enable traps |
Enables all the supported trap types |
|
|
snmp-server host [host-addr] [community-string] |
To specify the recipients of the SNMP notification operatio |
|
|
route <if_name> <ip_address> <netmask> <gateway_ip> [metric] |
Set the inside/outside default route to the router attached to the Internet. |
|
|
no <access-list> number |
To remove a specific access-list |
|
|
no snmp-server enable traps |
Disables all the supported trap types |
|
|
no snmp-server host <ip address> |
Removes a specific recipient of the SNMP notification operation |
|
|